-
See: https://randomnerdtutorials.com/esp8266-voltage-regulator-lipo-and-li-ion-batteries/
-
Think there should be some kind of cut off protection for the batteries for when they run too low. If the batteries don't have any protection circuitry, drawing more power than they can provide can da…
-
I am trying to build a thermal model of li ion battery pack, it would be helpful if someone could help me to get started with this ecm package. My whole ideas is to create a electrical and thermal mod…
-
We're using a Li-Ion rechargeable battery to power T-PCIE + SIM7600E modem. It's working fine as long as the battery it's over 3.7-3.8 V, but under, the board shutdown. Unfortunately that means I can …
-
This is a great project! I came here because it was featured on Hackaday just now.
I wonder if one could add another regulator to output 1.5V so that we could get rid of the coin cell of this thing…
-
File "d:\learn\NASA_Li-ion_Battery_SOH_Prediction_with_MVIP-Trans\soh_train.py", line 497, in experiment
y_pred, _, _ = model(inputs)
File "D:\anaconda3\envs\pytorch\lib\site-packages\torch\n…
-
Hi, just looking at the crusing current rating you gave here https://github.com/uavpal/disco-docs/wiki/batteries, it seems to be more like half that, 45 minute flight time -2.7Ah, 2.7/0.75, average cu…
-
-
Hi, I'm surely doing something wrong, but here is my situation in designing a voltage tester for 3S li-ion batteries using a Wemos D1 Mini.
Note the only connection to the arduino is the A0 sense pin…
-
### Variant
_No response_
### Control type
_No response_
### Control mode
_No response_
### Description
I don't have the 36V Li Ion batteries but do have the mainboard and motors/wheels. Is it …