-
LimeSDR XTRX Reading board's temperature using CMD_ANALOG_VAL_RD reports success, but always return temperature value of 0.
https://github.com/myriadrf/LimeSDR-XTRX_GW/blob/a6fb00c81d7757e41c1f201df2…
-
Hello,
we just updated the LimeSDR XTRX via the latest bin file on the master branch, i.e. the 1.11 image from https://github.com/myriadrf/LimeSDR-XTRX_GW/blob/b4a7347c6f5a117f1bd425ee5f7075cb38f93…
-
When using single antenna mode `-A 1`, LTESniffer seems to ignore `-a id=2` selection. E.g. with any SDR this happens:
`sudo ./build/src/LTESniffer -A 1 -W 4 -f 1869900e3 -C -m 0 -a "num_recv_frame…
-
I am using the legacy function LMS_SetSampleRate(device, bandwidth, oversampling) on a 64-bit bookworm install on a LimeNET Micro 2.0 DE to generate a stream that is put into an fft and displayed. The…
-
I have lime sdr mini v1 purchased probably 2018/2019 and am trying to use with fedora fc39
Fedora version GNU Radio Companion 3.10.6.0 I am unable to compile gr-limesdr…
-
Hello, is it possible to add LimeSDR hardware support for SDRtrunk or somekinda plugin that enables SDRtrunk to work with LimeSDR?
-
## Issue Description
Hello everyone. I would like to run srsRAN on LimeSDR v1.4s using LimeRFE amplifier. How to do it?
I use this [documentation](https://github.com/myriadrf/LimeRFE/tree/master/har…
-
Hi,
I am trying to load firmware to LimeSDR-Mini v2 board. I have generated and loaded gw for limesdr_mini_v2 target. Also I have taken firmware from [lab004](https://github.com/litex-hub/fpga_101/…
-
## Issue Description ##
Unable to build from source on Raspberry Pi 5 with Ubuntu 23.10 (22.04 LTS not supported) with a LimeSDR Mini 2.
## Setup Details ##
Raspberry Pi5 8GB
Ubuntu 23.10
LimeS…
-
Hi,
I was wondering if it's possible to use a LimeSDR with gr-lora? Also, if it's possible to listen to both uplink and downlink traffic simultaneously (I know that it may depend on the HW)?
Be…