-
#### Summary
Update or Delete the country list that is incomplete and outdated and keep only the link to the LoRa Alliance documentation that has an updated version. If deleted, a drawback is t…
-
See https://resources.lora-alliance.org/technical-specifications/ts013-1-0-0-payload-codec-api
[X] Check existing scripts for standard compliance
[X] Create `metadata.json` file
[X] Create exampl…
-
Hello,
Is there any encoder for TTN v3 available ?
Thanks And Regards,
Rupak Banerjee.
-
### Category
Other
### Hardware
Not Applicable
### Firmware Version
2.2.24
### Description
Accorting to lora alliance the band plan starts at 433.05Mhz.
Not 433.00. It ends at 43…
-
https://en.wikipedia.org/wiki/Lorawan
https://www.lora-alliance.org/For-Developers/LoRaWANDevelopers
-
Hello Helium Team
The Telecommunications Authority of Trinidad and Tobago (TATT- tatt.org.tt) has outlined that the frequency that we operate are compliant to ITU-R Region 2 (page 4 ) .
https…
-
### Platform
ESP32
### Description
There is currently no region setting for Philippines (PH) using AS923-3 (915-918 Mhz, 25mW)
https://www.reddit.com/r/HeliumNetwork/comments/m8ljdd/anyone_runni…
-
Hi,
We have been running lorawan compliance tests on the FW and I've followed the advise given in this slide:
https://lora-alliance.org/wp-content/uploads/2020/11/lora_alliance_certification_deep_…
-
This issue is for collecting information about LoRaWAN and implementations from [Congduc Pham's Gateway](https://github.com/CongducPham/LowCostLoRaGw/tree/master/gw_full_latest).
# Single-Channel …
-
I think there is a mistake in v4.5.0 `relay_tx_check_decode_ack()` where the WOR channel frequency and datarate is used to calculate the ACK MIC, instead of the frequency and datarate extracted from t…