-
### Description
Product mcu : https://www.wch-ic.com/products/CH32V103.html
Features
Qingke V3A processor, max 80MHz system clock frequency.
Single-cycle multiplication and hardware division.
2…
-
During testing for #3499 I discovered that when the time driver tick frequency is set to 1_000_000 the time is wrong when using the low-power feature.
I have a timeout task set to busy-loop after 6…
-
Hi @TripitakaBC ,
thanks for your awesome Work on the Ampinvt MPPT Solar Controller.
I received my AP-60A Unit in the next Weeks and i will run the ESPHome with the ESP8266 MCU, that should also…
-
Hi, This isn't an issue but rather a question / request. First of all, this looks like a great solution! Do you think it might be possible to create a similar device that’s battery-powered, perhaps by…
-
```
Implement MCU and system low power modes which can be enabled through system
calibration data.
```
Original issue reported on code.google.com by `ileacris...@gmail.com` on 5 Sep 2013 at 12:07
-
```
Implement MCU and system low power modes which can be enabled through system
calibration data.
```
Original issue reported on code.google.com by `ileacris...@gmail.com` on 5 Sep 2013 at 12:07
-
```
Implement MCU and system low power modes which can be enabled through system
calibration data.
```
Original issue reported on code.google.com by `ileacris...@gmail.com` on 5 Sep 2013 at 12:07
-
### Battery System:
- The system will use eight AA-sized NiMH rechargeable batteries (1.2V each) for
a total voltage of 9.6V. These batteries will power the motors directly through
the H-Bridge cir…
-
```
Implement MCU and system low power modes which can be enabled through system
calibration data.
```
Original issue reported on code.google.com by `ileacris...@gmail.com` on 5 Sep 2013 at 12:07
-
```
Implement MCU and system low power modes which can be enabled through system
calibration data.
```
Original issue reported on code.google.com by `ileacris...@gmail.com` on 5 Sep 2013 at 12:07