-
以下のエラーが発生してコンパイルが通らない。
```
d:\Users\Hyouhyan\Documents\Arduino\libraries\STM32duino_Low_Power\src\low_power.c:573:6: error: conflicting types for 'LowPower_shutdown'
573 | void LowPower_shutdow…
-
Hi, I notice that the esp32s3 does not support power management. Do you have a plan for this function?
-
Hello Microchip community,
Hardware: AVR-IoT-Cellular mini, Water level sensors (once Grove seeed connected to I2C, once Endress+Hauser Liquipoint connected to GPIO)
Software: avr-iot-cellular-ard…
-
- [x] I am running the latest version of this repository (dependencies too)
- [x] I checked the documentation and found no answer
- [x] I checked to make sure that this issue has not already been cr…
-
from claude
Yes, it's possible to detect if a device is in low power mode using JavaScript, but the implementation depends on the specific platform and browser. Here's how you can do it for differe…
-
### Homey version
Homey Pro (Early 2023) 12.0.1
### Tuya app version
v1.2.3
### App diagnostics report ID
9c71e19e-fd4c-4483-8095-d9c39e4ef378
### Description
I have 2 doorbells t…
-
Hi, nice project, thanks for sharing!
I believe the cli() and sei() calls are not necessary, as they are implemented in the [LowPower](https://github.com/rocketscream/Low-Power/tree/master) library b…
-
### Feature Description
The booth command has a -lowpower option which is quite useful. The synth command only exposes -booth but with no way to set this option. You can replace synth with its equi…
-
To modify the turn rate of an turret based on conditions have to create two seperate Turreted blocks, This causes an unwanted issue where facing of the turret will change to that of currently active T…
-
Board I am using: MKR NB 1500
Sensors: multiple IC sensors for physical environment readings
Power source: LiPo battery pack via on-board JST port
Other libraries: Arduino LowPower for SAMD
…