-
Hello @calohmn ,
I am trying to connect to Hono MQTT adapter from my M5core 2 device for updating telemetry data like temperature mentioned in cloud2edge tutorial , where Hono is running on Kubernete…
-
# Neopixel_board
本例程使用的是24x8阵列的Neopixel RGB LED
This example uses a 24x8 array of Neopixel RGB LEDs.
需使用M5Core + M5GO 底座驱动Neopixel灯板
Need to drive Neopixel light board with M5Core + M5GO base
…
-
Build a version of BBN Marine OS for m5stack CoreMP135
CoreMP135 Is arm based computer 4GB RAM and with many interfaces two CAN bus for NMEA 2000,
RS 485 for NMEA 0183,
Uart for pypilot motor co…
-
The Gesture code, and other touch code is missing from Unified for M5Tough.
-
When I remove the usb power supply, the M5Core is switched off and generates some strange sounds (tik... tik... tik...).
Any option to keep the product running on its own internal (little) battery ?
…
-
Instead of \ my Cardkb hats output / if the second from the right button on the 4th row labelled \ / = is pressed.
If your atmega firmware is the culprit, I need a fixed firmware and instructions ho…
-
### The problem
Following error shows soon after boot:
`[E][display:109]: Could not allocate buffer for display!`
This looks very similar to https://github.com/esphome/issues/issues/4315 except t…
ax42 updated
11 months ago
-
I try to flash my new M5CORE modul:
```
Type: 35
2019/08/19 17:15:39 detaching board ...
2019/08/19 17:15:39 closing serial port ...
2019/08/19 17:15:39 stop inspector ...
2019/08/19 17:15:40 …
-
I have a working code that supports M5Stack Core2. A couple of things require design decisions to make the cfGUI library compatible with Core and Core2 (if both should be supported by the same code ba…
-
14.05.2024 Marius
m5core geht nicht an, lädt nicht, kein flashen möglich alles Fehlerquellen wie Treiber Kabel usw. ausgeschlossen.
Fortsetzung des Projektes nicht möglich..