-
Hello and thank you for this great project!!!
I have the image on one M5Stack (the one with physicaly buttons) and it works great!
Now i want to do the same on the TOUGH version for outdoor acti…
-
The CoreS3 SE is basically a stripped down version of this board:
https://circuitpython.org/board/m5stack_cores3/
Compared to the M5CoreS3, the M5CoreS3 SE does not feature a camera (GC0308), pr…
-
### The problem
Defining "framework: type: esp-idf " with the POESP32 makes it not boot on POE
When the "framework" is not defined the device boots on POE just fine but then doesnt work as BL…
-
Let me start off by saying that I do not claim to be an expert of any sort with this stuff. I'm really good at researching and making copy/paste Frankenstein monsters.
I'm trying to incorporate the…
-
Main Issue:
The board won't properly boot up after code is successfully flashed.
It appears to me that the code can't fully load, and isn't even getting as far as void setup !
-----------------…
-
[ESP-BSP](https://github.com/espressif/esp-bsp) is standard a mechanism how to work with a board.
The initialization sequence in case of M5Stack CoreS3 includes also Power Up of display using AW952…
-
So, i've looked though all issues etc, I still cannot find a solution to this.
- I've selected the right board in the appglobals, as far as I can see,
- I've attempted formatting the SD in differe…
-
M5Stack Core S3 is using FT6336 for touch control.
Please, consider adding this chip, so that M5Stack Core S3 simulation could react on touch event, same like there is ESP32-S3-BOX-3 simulation with …
-
### The problem
I have the M5Stack POECam-W that I connected over ethernet both times and the [example sketch](https://github.com/m5stack/M5PoECAM/blob/5dece159b5f86b52b9eaaba1f0fbc889cb6f3bf9/exampl…
-
Hey I got the M5Stack basic v2.7
The serial output is all 0.00
Can you tell me changes need to be made for the code?