-
Hi i need some assistance
im trying to flash this board for a CNC router:
MakerBase MKS DLC32 v2.1
when im trying to flash the process end without error (MKS Laser Tool V2.1.1):
th…
-
Hello ,
I recently buy an MKS DLC V2.0 on aliexpress :
https://fr.aliexpress.com/item/HORS-LIGNE-GRBL-CNC-DIY-starter-kit-MKS-DLC-MKS-TFT24-tactile-cran-CNC-laser-machine/32913813397.html?spm=a2g0s.…
-
Hello guy, i wan to asking about my wiring method,
How about wiring method from microstep driver to makerbase dlc 2.1, what happen if i dont connect with ENA + AND ENA- from microstep to makerbase …
-
I have been able to flash the firmware and nothing works. it will turn on and stay on the boot screen. I have the ski mini e3 v3 .
-
I need help. Mks robin 2 motherboard is not loading marlin firmware. Please help me.
You certainly have knowledge. I'm good with apps. Tell me what to do, please. Thank you.
-
Good afternoon, I bought an MKS Robin e3d card, when installing the card I identified that the endstopes do not work.
Initially I thought it was a problem with the wiring or the micro switches, but…
-
I'm using the Makerbase tft32 and it works with 328p grbl, but not with STM32 grbl.
The makerbase tft32 sends grbl data to the grbl controller through serial, typically rx/tx.
https://github.com/m…
-
Hi
please update versions as
(https://github.com/makerbase-mks/MKS-DLC32/blob/main/firmware/TS35/CNC/Normal/Board_v2.0/V2.1.0_H35_20220526_02_N_CNC.bin)
Thanks
JF
-
### Machine Context
I have a simple XY 400x400mm Laser engraver/cutter from makibes with the model x1 but I would guess that those are just some rebranded standard chassis etc.
### Feature Descripti…
-
@makerbase-mks : please provide a new image with actual kernel!