-
In order for NPC tactical AI to act sensibly, NPCs must have sensible global goal-setting oriented around at least survival.
I'm thinking a Behavior Tree loosely modeled on Maslow's heirarchy of ne…
-
Allow user to make 6 measurements and compute anchor positions and save.
See https://forums.maslowcnc.com/t/maslow-4-manual-configuration-onshape-doc/20861
[js example in this topic](http://lang…
-
Hey Gauthier,
First of all, allow me to butter your biscuit. You have been very helpful and knowledgeable and I greatly admire and envy your skill. GRBL is so huge and complex and I would have love…
-
My original maslow works fine under webcontrol. In makerverse it calibrates and moves just fine. I get a few lines into my GCode and I get an Alarm: 3 (Abort during cycle) displays in the console, a…
-
Maslow inspired state machine for peoples
-
# Climbing the Tree :: Alexander Pavlenko — Blog
Some time ago I discovered Manfred Max-Neef’s Fundamental human needs taxonomy:
Unlike Maslow’s Hierarchy of Needs, which focuses on a…
-
Working on porting to the Grand Central M4, and I've run into a name collision between a definition between the definition of Ringbuffer in
Arduino15/packages/adafruit/hardware/samd/1.4.1/cores/ardu…
-
The Maslow original chain is 11 feet and going wider with the motors to short.
Perhaps link a source to 12 feet or more.
-
When I down load the G-code from Easel and run it in Makerverse, my Maslow moves the sled a little bit and then it’s all Z axis motion from that point on. My z axis just starts moving my router up and…
-
I finally got around to assembling my maslow cnc and there are hardware differences between the site instructions and what I received.
Is there an updated assembly guide for the new hardware?
…