-
1. I received void MXC_ADC_RefCalibration(mxc_adc_revb_regs_t* adc, mxc_adc_req_t *req) this function from Sanjay.Jaroli last year. this is used to load trim value of ADC reference, to improve accurac…
-
There looks to be discrepancies between different part datasheets as well as within code of what the values for GPIO drive strength represents.
The PBU support team confirmed the MAX32672 datasheet…
-
Using Max32672 EV Kit, base UART example project fails when using Async interrupt handler. Specifically, Async handler raises a GENERAL_COMMS_ERR followed by infinite loop when polling READ_FLAG to si…
-
I was performing some current measurements with the ADC and I noted an unexpected increase in the current consumption on the VDD and VDA lines that are related to the voltage level of the analog input…
-
The MXC_GPIO_RevA_SetAF() function needs to be updated to match the data from the User Guide.
![image](https://user-images.githubusercontent.com/53155328/229188035-8d8be644-b329-46ca-aeb0-6e2bcfd16…
-
![Screenshot (154)](https://user-images.githubusercontent.com/129331437/228655437-04a89790-88cc-4f00-9b5e-078bb0112c87.png)
Within any of the MAX32xxx peripheral drivers, the crc.h file includes …
-
Hi,
I'm trying to achieve the low power consumption of the MAX32672 in the EV kit.
I uploaded the LP example code and followed the steps from the EV Kit Datasheet to measure the current.
The …