-
Hello,
I have a Mediola gateway v5 with some devices:
- 2 Elero Blind motors, that i can control via home assistant and mediola2mqtt
- 2 generic 433Mhz devices that i control via IQCONTROL ap…
-
Hi all!
I just tried to make UDP broadcasts finally work on my HA instance when i noticed, that UDP broadcasts with blinds higher than 8 seem to have issues. as a reference i will simply copy some …
-
Hi,
first question. Is this plugin still actively developed?
second question: Any plans on supporting HmIP-SCTH230 CO2-sensor?
Thanks
Mike
-
Hi,
great work. I have an installation by Weinor who use the Elro shutter.
One shutter is connected directly to the sender BiConnect. The second one has the connector
BiRec. This is an actuator a…
-
First of all: Great great work!!! I'm so glad it works for my setup (I've got 10 Somfy RTS and 8 Elero Blinds on a V6 Gateway). Thanks to your effort I now can operate all these blinds via HomeKit (wh…
-
Hallo zusammen, Hi all,
bei mir läuft Homematic auf einer CCU3. Ich habe nun Redmatic installiert. Es startet, stoppt dann aber nach kurzer Zeit ohne, dass ich ansonsten irgendetwas gemacht habe. H…
-
I want to control my WAREMA EWFS Blinds with this addon,
but Icant add the type: WA to the configuration. Only ER and RT works.
I get: Fehler beim Speichern der Add-on-Konfiguration, does not matc…
-
In my setup the discovery of the state on elero blinds is not working. I'm using a v6 mediola gateway. I don't seem to receive any broadcast messages of the gateway. Sniffing my network i found out th…
-
Hi, is it possible to include type EVENT:
`{XC_SUC}[{"type":"EVENT","adr":"FF","state":"0"}]`
It is a Wireless socket with 433mhz
-
Da ich mich in letzter Zeit sehr Ausgibt mit den SmartHome Produkten von SCHELLENBERG befasst habe und auch ein meinen YouTube Kanal einige Videos dazu veröffentlich habe, frage ich mich ob es nicht a…