-
I'm trying to read data from the SPH0645LM4H.
The output received is :
```
f8d98000
f8d74000
f8d54000
f8e84000
f8e60000
f8e50000
f8e24000
f8e2c000
f8e48000
f8dfc000
f8e0c000
f91ac0…
-
**Describe the problem you have/What new integration you would like**
Please add support for BME860 BSEC esp-idf, because of the framework: arduino i cant run BLE there because it takes up a lo…
-
We're using a BMI323 IMU, connected over the I2C0 bus. This module needs to be able to communicate with it and return relevant data.
Also consider any calibration that is required for the module to w…
-
Hi,
I'm using LIS2DUX12 accelerometer in a Linux environment with kernel version 5.10 and I'm testing event monitoring with `iio_event_monitor` tool. I managed to verify the functionality of a few ev…
-
1. Stratux version:V1.6r1-eu028-us
2. Stratux config:
SDR
- [ ] single
- [X] dual
GPS
- [X] yes
- [ ] no
type:
AHRS
- [X] yes
- […
-
**Original report ([archived issue](https://osrf-migration.github.io/ignition-gh-pages/#!/ignitionrobotics/ign-sensors/issues/7)) by Michael Carroll (Bitbucket: [Michael Carroll](https://bitbucket.org…
-
Where can I find the fitting "AI-Studio Mobile" app e.g. shown in https://www.youtube.com/watch?v=Crps14LExmI The last published Android version on the [BME688 software page](https://www.bosch-sensort…
-
### Device name
ST LIS2HH12
### Device description
This is a ultra-low-power 3-axis accelerometer IC. It's full scale is selectable between +-2g, +-4g and +-8 g and the output rate can be between 1…
-
The one you talk about in here: https://github.com/kriswiner/EM7180_SENtral_sensor_hub/wiki/K.-Limits-of-Absolute-Heading-Accuracy-Using-Inexpensive-MEMS-Sensors
I'm working on a robotics project/a…
-
I have one, would be interesting if we could reuse the hardware, I can imagine you have probably moved on from the project by now.
Your repo is the only one I have found so far, maybe you have some t…
hvegh updated
4 months ago