-
Thanks for making this! I plan to build one, but after looking into the parts, it would be less expensive to just buy this if it will work...
https://www.sparkfun.com/products/12898
Will this work w…
-
Hi,
Would it be possible to implement a simple filter for MIDI active sensing messages (0xFE)?
Implementation: if input message from MIDI IN is 0xFE (active sensing) then do not send it to MIDI…
-
[The current version of the schematic](https://github.com/elkayem/midi2cv/blob/1626113092650d5b7fb3bcff1e6b570a65b09d46/images/schematic.JPG) shows pin 2 of the MIDI input wired to ground. This viola…
-
Not an issue, but a discussion starter.
This is a _remarkable_ contribution, not least for the excellent documentation which I am sure took a lot of time and effort. Thank you!
I have just acqui…
-
Hi Joe, I've only just discovered your In CV project which looks fantastic so was a bit disappointed to discover that the module is no longer available - and I don't have the skills to build my own. I…
-
Hi Sir,
I have latency issue using lcd shield kit and code for Smartwav2. But my other midi controller device has not latency even kat ktmp1 multipad to smartwav has no latency. Im using DIN 5pin m…
-
There is no way to use Arduino USB-Shield with a USB Midi Interface (like Edirol UM-1SX) as transport for this library.
-
Using the Ardunio R3-compatible SparkFun MIDI Shield, write a simple "midi looper" program
The shield has two potentiometers, three pushbuttons, a MIDI input, and a MIDI output. For this program, onl…
-
Hi.
I own a Yamaha Portable Grand piano that lacks real midi connection and thus been thinking about using an Arduino and an USB Host Shield to convert USB-Midi Midi.
In the device compatibility list…
-
Any interest in the USBH_MIDI driver from the USB Host Shield 2.0 project? I can submit a PR. Would it be better to keep the USBH_MIDI code in a separate repo or include with the core files?
https:…