-
**Is your feature request related to a problem? Please describe.**
Recently, the MHP50 Hotplate was released as a successor to the MHP30. It is available for about 110€ on Aliexpress and supports 100…
-
Hi,
I got a MHP30 a few days ago and thought I could try Iron OS.
Flashing was easy on my Macbook, no problem.
I use the following charger and cable combination:
https://de.ugreen.com/coll…
Piwio updated
3 months ago
-
**Describe the bug**
I have a Chinese somewhat generic power supply that looks like an "updated PinePower Desktop": it has two USB-A and three USB-C. The last USB-C port supports PD3.1 140 W
With …
-
Hi Gabriel,
Do you happen to know if the LA104 can show the signals from the DT71 from Miniware.
I put it in signal-generation mode and would like to see the output on the LA104, but don't know if…
-
**Describe the bug**
Device repeatedly resets itself after showing the Miniware logo for a split second. On the first time, it manages to make it to the idle screen (showing 5V) for a split moment as…
-
Is there a way to take the .hex files provided by miniware and allow them to run from shell.elf?
I know they source they have released is several version behind the .hex files they have made availa…
-
Hello, do you have any follow up on this topic?
https://oshwhub.com/libc0607/ag1280q48-demo-v1
I am looking for a toolchain for building fpga bitstream for AGL1K used in Miniware DS213 and LA104.…
-
The DS212 hasn't seen an update since ever... basically since release. The hardware is lilkely similar, if not same as mlst of the other Miniware DSOs. It is offered here: http://www.minidso.com/forum…
-
There is a whole story behind those encoders. I was using only my firmware all the time and I have tried the original fw just when the device arrived. So I thought this was something rel…
-
Any compatibility with the DS213?
http://www.miniware.com.cn/product/ds213-mini-oscilloscope/
Other sketchy sources (ebay, banggood.com, etc.) say this has 15MHz Analog Bandwidth.
From main w…