-
El código implementa un controlador para el sensor de temperatura por infrarrojos (IR) MLX90614 en MicroPython. La clase SensorBase proporciona métodos para la lectura de datos de 16 bits desde regist…
-
MLX90614_SMBusWrite() is not working. I tried to change the emissivity using this function but it doesn't change the emissivity.
Also in the MLX90614_SetEmissivity(uint8_t slaveAddr, float value) fu…
-
I2cdetect program works sometime with Raspberry Pi5 and works all the time with Raspberry Pi4
I was programming a GY-906 (MLX90614) and the program to read the temperature works. i2cdetect works on…
-
### The problem
The build-in component `mlx90614` sometimes reports an invalid temperature and `nan` humidity. Re-installing the device might resolve the issue sometimes. Once my device has invalid…
-
In *v032* to support MLX90614 it was enough to add the `sendStop` parameter to the `endTransmission` and `requestFrom` functions, as it's done in Arduino. See https://www.libelium.com/forum/viewtopic.…
-
https://github.com/letscontrolit/ESPEasy/blob/mega/src/_P024_MLX90614.ino
We shouldn't use the port setting for this hardware, it's set to 0x5A (90) and is not changeable (or is it?).
```
047: …
-
In the [application note](https://www.melexis.com/en/documents/documentation/application-notes/application-note-mlx90614-changing-emissivity-setting) it says to enter EEPROM address 0x0F unlock key an…
-
-
I would want do use it on a RPI4 using the GrovePi Hat
-
Hey, I tryed to use my mlx90614 but i had some issues by using it. Maybe someone can help?
So i tryed this code from you:
import mlx90614
from machine import I2C, Pin
i2c = I2C(scl=Pin(5),…