-
I'm trying to connect microOcpp with Steve and I had some problems to work.
i didn't use the 'docker' to build the STEVE, it was the 'Configuration and Installation'
# The Monitor
d51 3 mongoos…
-
Hi,
I have multiple Shelly +1 installed in september 2022. They working very well with this firmware.
Suddenly one of the +1 starts rebooting every view minutes. (between 2 and 30 Minutes)
When…
-
Hi all,
i have 2 out of 10 shelly 1 plus at my home which are not correctly upgrading. I dont know if they both were in the same double-package and have some common differences with the other ones …
-
The readme for this project includes the following link:
https://mongoose-os.com/docs/quickstart/using-c-cpp.html
When I attempt to navigate to this page, I get the following information served …
-
```
Mongoose allows to specify only port to listen on and in such case the web
server should be listening on all ip addresses available (127.0.0.1,
192.168.x.x, public..). Example from mongoose docs…
-
```
Mongoose allows to specify only port to listen on and in such case the web
server should be listening on all ip addresses available (127.0.0.1,
192.168.x.x, public..). Example from mongoose docs…
-
```
Mongoose allows to specify only port to listen on and in such case the web
server should be listening on all ip addresses available (127.0.0.1,
192.168.x.x, public..). Example from mongoose docs…
-
```
Mongoose allows to specify only port to listen on and in such case the web
server should be listening on all ip addresses available (127.0.0.1,
192.168.x.x, public..). Example from mongoose docs…
-
```
Mongoose allows to specify only port to listen on and in such case the web
server should be listening on all ip addresses available (127.0.0.1,
192.168.x.x, public..). Example from mongoose docs…
-
```
Mongoose allows to specify only port to listen on and in such case the web
server should be listening on all ip addresses available (127.0.0.1,
192.168.x.x, public..). Example from mongoose docs…