-
Hi João, thank you for the great project.
I have two focusers running 2a on an UNO and controlled by INDI Moonlite DRO driver in EKOS, Kstars.
During focusing, the focuser will randomly jump bac…
-
I'm using 28BYJ-48 stepper motor with ULN2003A breakout board and when I connect to the focuser, It always start in moving state to true. I have to go in the device hub, make a small move, then the mo…
-
So things look really great right now - in that they seem like they are within reach.
I am sort of confident that I could try to manually change the time/step and the step resolution and get my har…
-
Sorry,
Maybe a stupid question, but where need to put those 4 wires?
You mentioned pin 8/9 - but the skywatcher dc mother has 4 wires. Where to put each color?
Thanks!
Joerg
-
I know it's been way too long but I thought I would drop you a line and share something I figured out that I'm pretty sure you can use(below)...but first a long overdue update!
I did end up getting…
-
I don't have any knowledge about programming or Arduino, but I liked your project and decided to make a auto focuser for my telescope, I managed to insert your code through Arduino, but the Moonlite d…
-
Hallo and many thanks to share this work with us. After 35 years without electronic bricolage you invited me to follow you. Thanks! I have Win10, the Nano and the 28BYJ-48 stepper motor with ULN2003A …
-
I was certain there was something wrong with my hardware - after trying several times with one I had wirewrapped, and finally using a breadboard and it still seemed like it was dead... and then when t…
-
Compiled and uploaded the firmware to Arduino Mini. I am able to communicate with it from the Moonlite Single Focuser
v1.4 app, but the Moonlite DRO Focuser Driver (downloaded from focuser.com) doe…
-
when I power the motor up (5v Arduino), it starts to move, then when i connect it to ekos or moonlite single focuser and I gave a goto (ex: 10000 steps) it goes where it has to go, but after 10 second…
PdP03 updated
2 years ago