-
![USFSMAX_Plot](https://user-images.githubusercontent.com/6698410/101543986-d4344500-3959-11eb-9703-184a77ea6839.jpg)
-
**Describe the bug**
After disarm the servo actuator connected to MAIN1 output starts jittering. The intensity of this jittering varies. This state occurs only sometimes. The tested setup was CUAV Na…
-
**Describe the problem you have/What new integration you would like**
Support for ESP32 light sleep mode
**Please describe your use case for this integration and alternatives you've tried:**…
-
This is the blanket g-code support ticket. G-code is a huge thing, not completely standardized, and adjusted on an application basis. It makes sense to support it for software that creates gcode that …
-
Am trying to use the madgwick filter in this repo to get multiple (15) MPU9250 all placed on human body for motion sensing...is this a good filter?...and is the library in this repo compatible with ra…
-
My Radeon 6650XT is not recognized by this software, the following message appears but the software works fine
```
Unknown Radeon card.
-
Hello Kris,
Thanks for posting your code, examples and wikis online, they are awesome!
I am getting a small drift when the MPU9250 is put at rest after movements, it looks like a small 5-10° conve…
Jaqos updated
6 years ago
-
Pfaff Expression Line Sewing Machines can import stitches, but only in *.spx format. Would it be possible to add *.spx as an export format in Inkstitch?
As far as I can see, only really expensive …
-
Hi there,
I appreciate you adding RC controls to the code, this helps! However, how and where in the code can one change the way the motors behave for the control of a specific robot?
To be more…
-
Hi Kris,
Thanks for the great code. I have managed to obtain the accelerometer and gyro datas, however my magnetometer datas give out only zero values. When I run the code, I managed to get the out…