-
### Current situation
The ssh tunnel for access to local services is started when:
* Remote support is enabled, or
* Remote console (VNC) on VRM is on
The problem is that remote Node-RED and…
-
Hi all,
I have installed the sungather add-on on Home Assistant running on a RPI4. The add-on seems to work fine, except the mqtt part. The logs show communication with the inverter, and values ar…
-
After setting up the integration with the GUI I've got this error on the HA notifications :
```
aarlo Component Setup
Error: general-error=gaierror
Traceback (most recent call last):
File "/us…
-
### Is your feature request related to a problem? Please describe.
I'm logging the data produced by OpenDTU into a database using a small tool I wrote and open sourced yesterday, [opendtu-logger](h…
-
Hi All,
For the very first attempt of MQTT Sub Sampler, Response code is shown as 200, but the received message is shown as 0.
And all the remaining attempts of MQTT Sub Sampler are failing with E…
-
Hello,
I am running S2 Mini board (but tried with WROOM-32 and it was the same) and from time to time the board goes offline and after a while it reboots. Here is the log from the WEB GUI:
[17:36:…
-
I don't know why this is failing with the error:
`WebSocket connection to 'ws://localhost:1883/' failed: `
``` js
const protocol = "mqtt"
const host = "localhost"
const port = 1883
app.use…
-
Hi, I would like some help... everything is connected, esp32, dashboard, mqtt, but I don't see the information on the screen and neither in the mqtt /beacons/office nor does this topic appear directly…
-
Hi,
Might have a small issue trying to use Automate with 3.30
Uploaded the vehicles json for my Kia e-Soul (SK3 post 2019 64kWh) using the Ioniq/Kona profile, and, had to change to the AutoPid p…
-
Wifi cannot obtain ip address. If i choose GS-T3E v2.3 in https://nightly.openhasp.com/, wifi is working but display not.
Logs:
open____ _____ _____ _____
| | | _ | __…