-
Hi,
i use a UT8803E device. PC running with Mint 22.
Unfortunately the device will be not recognised as a /dev/ttyUSBx
I see only: (dmesg)
```
[ 5738.844267] usb 2-2.4: new full-speed USB devic…
-
While playing around with NEST Desktop, I ran into the slightly confusing case that multimeters connect *to* the neurons they are recording from, while for spike recorders the connections are the othe…
-
In the context of tvb-multiscale cosimulation, it is possible to perform a NEST -> TVB update either
- via a population spike trains -> mean population rate conversion, or
- via a population mem…
-
- [ ] switch to good datetime formats in all instances - datetime.datetime
- [ ] Low-level functions for Keithley Multimeters
- [x] low-level functions for a Lock-In Amplifier
- [x] plotting the r…
-
The 3v3 pin on my TTGO v1.7.1 is measured as 3v854 on two multimeters. This voltage actually goes to the ESP32 chip, so I'm wondering two things:
1. Why is the voltage so high?
2. How does the ESP…
-
We are exploring the feasibility of receiving material as donations
i.e. old but working instrumentation : multimeters, scopes and such... We are in contact with CERN (ATLAS and CMS) and KM3net explo…
-
Consider adding support for [libsigrok](https://sigrok.org/wiki/Libsigrok) and [libsigrokdecode](https://sigrok.org/wiki/Libsigrokdecode). From their docs:
"The sigrok project aims at creating a po…
-
I do know the adapter, I have, and from my peripheral I do know both identifier and address. Is there a way do connect to it directly without having to go via `get_adapters` and `scan_get_results`?
ullix updated
6 months ago
-
A window that opens and show the readout to a connected multimeter.
A checkbox could be enabled in the window that reads out the value through text to speech.
From device: READOUT:"12,345 Volts"…
-
https://a.co/d/f6CS4SiT