-
I'm trying to update the firmware in my NanoVNA-H to the latest shown here of v1.2.29 using the .dfu file and stm32CubeProgrammer software on Windows.
It seems to recongnize the connection and it r…
-
**Describe the bug**
The example https://scikit-rf.readthedocs.io/en/latest/examples/metrology/NanoVNA_V2_4port-splitter.html#Measuring-a-4-Port-With-The-1.5-Port-NanoVNA-V2 is out of date and uses n…
-
On some vna 2 (perhaps all), you can set the ifbw by playing on an "average" terms: Then the measurement is quite long but more accurate. A same program works well with an averaging of 10 but failed w…
-
I tried to run the app today (both the official one and a local installation build from your source).
Chrome (version 74) reports "No Compatible Devices Found" when I try to connect.
The "no dev…
-
I propose to add compatibility with NANOVNA V2.
-
version 0.6.3
windows 10, python
PS C:\utils\nanovna_063\nanovna-saver> py nanovna-saver.py
Traceback (most recent call last):
File "C:\utils\nanovna_063\nanovna-saver\nanovna-saver.py", line …
-
First time every updating the firmware on this. I checked the version message which indicated that my unit was running the -H version and pointed me to this GitHub. I downloaded NanoVNA-H4_20200221.bi…
-
Current link to nanoVNA App in README.md is broken
-
Hi owenduffy, nice improvement!
I detected one minor issue - the tinySA screen format is not correct (line 67-69), it should be 320x240:
```py
if devicename == 'tinysa':
width = 480
hei…
Ho-Ro updated
1 month ago
-
Got my new Plus4 today.
Unfortunately the display flickers very strong.
It gets less if you open up the menu.
The issue also appears when the VNA ist connected via USB.
Therefore I don't assume …