-
I printed the 17_FrontPlate_x2.stl part, but it doesn't fit the extruder.
Can you fix this?
![image](https://github.com/aTinyShellScript/v2.4_AWD/assets/104955811/d81af378-a77d-4366-a7dd-5230a4d41…
-
Hello,
I LOVE YOUR IDEA. I just ordered one of the "standard" closed loop controler for a nema17, but yours is definitely one step above...
However, I have some requests/additional ideas here...…
-
After playing around with 5 different NEMA17 and 3 hybrid stepper DIY boards I figured that not all motors are "magnetically compatible" with the concept.
I did not bother reading out the field val…
Quas7 updated
3 years ago
-
Is there need change Swift pro's code?
-
With your tracker. Thanks!
-
It seems that the exported STLs are too small, approximately a factor of 10. This should be checked, e.g. the spacing of nema17 mounting points provide the right scale factor.
-
Hi, my name is Alexis! I'm a research assistant and this is the first time I've worked with instrument fabrication. I have a few questions regarding the design and build for this microscope. I was won…
-
I have some strong power nema17 stepper and bldc hub motor from hover board. Its possible way to connect?
-
When integrating the top_left_microswitch.stl with drive_bmg.stl, there is not enough clearance to install the cable anchor due to the NEMA17 motor's size. The only workaround is to remove the cable…
-
Hi everyone,
I need help for setting properly my new servo42d and servo57d in my cnc.
My 3 axis cnc configuration is 2 nema17 high torque in Y axis and 1 in X axis and 1 nema23 in Z axis.
This is t…