-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Dear sir,
I am developer on android and esp32 and i am intrested in nmea 2000 but that the first time i am lost.
understanding nmea 0183 no problem simple . but nmea2000 i am missing something…
-
We discovered another software [^1] for the [OpenWind](https://www.openwind.de/) devices that emits NMEA-0183 sentences using the `$WIMWV` identifier. Does it make sense to support it?
Example sent…
-
I’ve done a similar project.
You might find some code useful and re-usable in yours. :)
UI is LVGL.
and various protocol parsers.
pypilot tcp, Victron MQTT, SignalK tcp,
NMEA 0183. MDNS discov…
-
Hi,
We have a Seatalk wind instrument in the cockpit and a Garmin 400C fish finder operating on NMEA 0183 mainly used as a depth gauge and I'd like to connect them to Freeboard. If we have to set t…
-
```
I played around a little with the mcu item today. Pretty interesting. I'm
thinking about how to make the data into a more useful format, Currently I'd
like to be able to translate from NMEA 2k t…
-
When applying the calibration, the updated values are sometimes not following the calibration table.
When applying a negative number, the results are off.
When using (small) positive numbers, th…
-
Issue #162 brought up that this parameter was not complete in canboat. The issue was not solved at that time. Now, if the rate of turn parameter in PGN 129038 is properly used it is not a major issue.…
-
MWH - Wave Height NMEA 0183 Approved by the NMEA 0183 Standard Committee as of October 1, 2008
$--MWH,x.x,f,x.x,M*hh Wave height, meters Wave height, feet
-
Rover/Boat currently supports echosounders like the ECT400 that output using the NMEA 0183 protocol but there are many other low cost echosounders out there like the [AirMar DST 800](http://www.airmar…