-
NTAG213/6 has the ability to set lock bits which means a user can provide a password to set the tag as read only and then set a password again to change the tag to writable.
"Configurable password pr…
-
Sorry for bothering you but I was looking at your NFC library with the hope I could use it for (at least) reading NTAG213 tags (ultimately I would like to read the NDEF data).
With limited micropyth…
-
It seems that an empty NFC tag, written with the folder code, is not working, but a MyFaba figure (which can be erased and rewritten) when written with the code, activates the custom folder.
-
- https://www.nxp.com/docs/en/data-sheet/NTAG210_212.pdf
- https://www.nxp.com/docs/en/data-sheet/NTAG213_215_216.pdf
- https://www.nxp.com/docs/en/data-sheet/MF0ULX1.pdf
- https://www.nxp.com/docs…
-
Hi
I’m looking to create some generic nfc tags for my ace pro to make it easier when I swap filaments
I’ve read some info with a proxmark3 (still learning this)
il post further when I get on …
-
We've ordered NTAG213 tags. https://www.nxp.com/docs/en/data-sheet/NTAG213_215_216.pdf
There's two main components to the system, "provisioning" and "tracking".
The tracking system will just rea…
d4l3k updated
6 years ago
-
I have set up a device which seems to be working in general.
I can scan the nfc card and the keychain that comes with the pn532.
I have bought some NTAG215 stickers, and some NTAG213 stickers, n…
-
Any consideration for functionality creating password encryption with NFC tags? I have NTAG213 and I need to allow my users to protect their tag so that nobody else can overwrite their content.
-
Installation passes successfully, logs ->
[magisk_install_log_2021-09-05T12:54:05Z.log](https://github.com/Magisk-Modules-Repo/NfcScreenOff/files/7111362/magisk_install_log_2021-09-05T12.54.05Z.log)…
-
Currently using Mifare ultralight NTAG213, trying to implement password protection for writing to tags (so strangers cannot write to a users tag).
***I see this issue has been brought up previousl…