-
hi @iwanders
great work!
I'm sharing your project into my own Volvo Project here on GitHub "Open Hardware Electronics for the Volvo P2 platform"
[https://github.com/aeonSolutions/AeonLabs-AI-Volv…
-
HI IWANDERS.
I tried from 2 days to make it works but without succes!
I use esp32 wroomer 32U and a mc33290. Witrh this setup i had other library witch work at the same pinrx 16 and tx 17. For mc332…
-
This isn't really an issue, I found a list of all (?) OBDII fault code names that I think apply to OBD9141, maybe this helps someone. It's too long to paste so I uploaded it to my account here [https:…
-
Hi,
I tried to get any of the examples working, but no success at all.
I want to create a simulator on K-Line. I tried this with Arduino Uno and Mega.
I assume that with all the different libraries…
-
Dear Iwanders,
I would like to use OBD9141 on an ESP32 SIM800C board, where the 16/17 pins are not available. Unfortunately the Serial1 RX_PIN 4 and TX_PIN 2 configurations crash :( What am I doing…
-
Hi @iwanders Thanks for your sharing. https://github.com/iwanders/OBD9141
I am trying example code 'reader_softserial' but unable to init the obd as defined here in obd.init().
Please suggest~ Thank…
-
Hey!
Can I use this library with the MCP2025 IC? If so, do I need to change anything in the code?
MCP2025 datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/20002306B.pdf
I found it pretty…
-
Good afternoon. I'm using ESP32 and I'm facing a problem. My code works until I include the LiquidCrystal_I2C.h library. After connecting, the ECU does not communicate.
```
#include
#include
Liq…
-
Hi,
I was trying to communicate with ODB2 with my 206 1.1cc auto peugeot which should have the KWB2000 slow protocol.
I built the optoisolated hardware interface and it works properly with perfect s…
-
Hey there ive been trying to get the pid call to work with no luck. im currectly connected but when calling ny other address then the 3that are in the example i get nothing displaying. like nothing at…