-
From the readme.md:
> the knob now correctly emits 20 pulse per revolution, matching the dedent.
I have an issue where my large knob will not fire an event after a direction change until the sec…
-
See here: https://www.reddit.com/r/olkb/comments/5i18ze/qmk_firmware_flasher_memory_write_error/db4ljlt/
Until Jack gets a webpage set up, probably best to instruct users to email him.
-
the online QMK configurator gives me a .JSON file and so i cant use QMK toolbox to flash my keyboard, which is the massdrop x olkb planck.
-
## Describe the Bug
Flashing Preonic/rev3 with default or custom keymaps succeeds but the keyboard is unresponsive and emitting a monotone continuous sound (instead of the standard three-tone conne…
-
I'm using a Keyboard with one shot modifiers / sticky shift etc.
So on a shift press the next keypress will be shifted.
When karabiner is activated the keypress shifts / modifies two keys instead …
-
There are commercially available keycaps for the Kailh PG1316S which are _perfectly_ compatible with the Cherry MX ULP. I have both switches and tested the keycaps on both. They fit perfectly.
I go…
-
Couple of suggestions for V6 (primarily from my experience building this board, but also stolen from this project: https://www.reddit.com/r/olkb/comments/hmxitl/bluetooth_kinesis_advantage_bluemicro_p…
-
I have two splits using teensy's and TRRS jacks correctly sending key strokes across the wire. However, I haven't been able to get an RGB strip to light when connected to the I2C pins. It works when c…
-
I'm into mechanical keyboards for a while.
I stumbled upon your project from an reddit/r/mechanicalkeyboard post
and already ordered a pcb from you even though your layout option
is with the basic …
-
cannot open DFU device ...
と表示される
