-
### Feedback
I can see the Effect and Speed in a switch card/control but can't figure out how to surface that otherwise in HA
![Pool light hayward issue](https://github.com/user-attachments/assets/1…
-
Installed the custom repository. Then when trying to install the interface I am getting an unexpected error. Have been trying to figure out the issue but not obvious (I am low level). Here is a lin…
-
When trying to turn on the lights I get an error in HA that says
_Failed to call service light/turn_on. 'int' object has no attribute 'value'_
I get a similar error when trying to turn off the ligh…
-
This was split off from #63
related issue to add API support: https://github.com/cryptk/python-omnilogic-local/issues/42
-
My heater shows F instead of C but the OmniApp shows it correctly. See screenshots.
.
![Screenshot_20240519_091333_OmniLogic](https://github.com/cryptk/haomnilogic-local/assets/134546663/0b036fdd-e8…
-
The integration currently doesn't list the omnilogic devices in the Device Registry. Appears there is some documentation on it here:
https://developers.home-assistant.io/docs/config_entries_index…
-
Hello,
Seems not working with Hayward EyesPool module. Didn't connect at all.
Didn't found much information about this module and Home Assistant.
If someone have some information about it …
-
I have a Hayward Model# HP51202T heat pump (heat and/or cool model). Here is what the omnilogic app shows.
![omnilogic app - heat pump UI](https://github.com/cryptk/haomnilogic-local/assets/1938191…
-
Can you add support for dual speed pumps? The other integration shows sensor or attribute when the pump was running in low or high, but it couldn't set as the set values were numerical.
Thanks
momoz updated
2 months ago
-
I have three identical Hayward VSP pumps. One is for pool/spa filter, one is for in-floor cleaner, and one is for water feature.
I just finally configured omnilogic-local integration into HA. I'm…