-
## Hardware
* [ ] ESP8266
* [x] ESP32
* [ ] Raspberry Pi
### nRF24L01+ Module
* [x] nRF24L01+ you verified this is a **Plus model** capable of the required 256kBit/s mode
* [ ] **square …
-
### Is your feature request related to a problem? Please describe.
Unterstützung für die neue umsetzung der drosselung.
Mitteilung von Hoymiles:
Die Reihe HMS-1600/1800/2000-4T unterstützt ab s…
-
Thank you very much for your excellent work. I am new to this field and there is no problem with training and testing when reproducing your code. But when I run the full evaluation of DTU data, I get …
nwulq updated
5 months ago
-
current state: I have PlattformIO and VisualStudio code installed.
I have currently 3 Projekts opened with PlattformIO and all 3 are in the Workspace.
The 3 Projects are Open DTU on Battery, Daly2MQ…
ghost updated
7 months ago
-
Hi, I am using a grid with two dtu's. Can you expand the configuration to use 2 dtu devices? The total value (or/abd dtu 1 + dtu 2 vaule) should be visible on the OLED SH1106. Tx. I am using the ESP32…
ohAnd updated
2 months ago
-
With my DTU/Device Combo, i get the DC information for each port, but the AC values and the temp and some others are missing.
Any input i can give you to add this information ?
-
### What happened?
The hoymiles support just updated my HM-1200 and opendtu now shows Unknown model. Hardware teilenummer is 124097
### To Reproduce Bug
After firmware update by hoymiles support
…
-
Witaj,
Trafiłem na twój projekt i bardzo by mi się on przydał ale niestety doszedłem do kroku gdzie wgrałem do HACS twoje repotytorium i nieststy nie wie jak dalej zrobić konfiguracje.
Mógłbym …
-
-
### What happened?
Sporadically the dtu lost the connection between dtu and inverter.
Then the inverter is showing red in dtu.
Next day (after dc cut off) the connection will reestablished.
A …