-
Hi Mickael,
According to this:
https://github.com/home-assistant/core/issues/70869
it seems that Overkiz integration does not work anymore with Rexel Energeasy Connect.
But Rexel Energea…
-
### The problem
Taken from Home Assistant Core log ...
Logger: homeassistant.util.loop
Source: util/loop.py:136
Detected blocking call to load_verify_locations with args (, '/usr/local/lib/pytho…
-
### The problem
I have a Somfy Smoke alarm (https://shop.somfy.co.uk/smoke-alarm-io/). In my Tahoma app, I can test the sensor alarm. Unfortunetly, in the Overkiz integration, I haven't (see screensh…
-
Hi 👋
I’m one of the 3 maintainers of the [Overkiz integration ](https://github.com/iMicknl/ha-tahoma), previously named *Somfy Tahoma*.
[Overkiz](https://www.overkiz.com/) is the brand (really c…
-
### The problem
I’ve added my Somfy Connection Kit through the Overkiz integration. It works great in general, but I noticed that the expected additional entity for a low speed position change does…
-
### The problem
The recommended workaround for https://github.com/home-assistant/core/issues/108595 is to use the IP address of the Tahoma switch instead of its hostname.
However, when trying to d…
-
### The problem
Hello
I cannot display the water consumption information for the water heater in the energy consumption table.
io:AtlanticDomesticHotWaterProductionV2_CE_FLAT_C2_IOComponent
### …
-
### The problem
**Action**: trigger an IO device (blind) connected through Overkiz (Tahoma Box)
**What happens**: An error message pops-up / the device is triggered / its state on the dashboard do…
-
### The problem
I have the following issues after adding my Hitachi heatpump to the Tahoma app:
* water boiler appears in the integration as unavailable
* circuit 1 & 2 of the heat pump don't appea…
-
### The problem
Every day I get a "Gateway ID" error in Overkiz error that reads as below. Same problem as [#66606](https://github.com/home-assistant/core/issues/66606)
"Translation Error: The in…