-
**Describe the problem you have/What new integration you would like**
Since 1-Wire sensors work reliably over more than 100 meters (if wired up properly), it allows having a central esp32 hub running…
-
we currently spec an i2c bus on the daughter board connector, on a twisted pair. This is not ideal becuase of the TP.
While i2c should work, maybe switching to something like rs-485 would be cleaner.
…
-
Hi,
not sure if this is the right place. I try anway.
I build a setup with Airrohr and Teensy 4.o according to the manaula on this page.
The Airrohr works great. The DNMS also with the USB te…
-
Update of firmware of existing (and working) Sensors makes problems, the DNMS is not found anymore.
## Configuration
- ESP8266 with SDS011, BME280 and DNMS (without P82B715, connection cable about 1…
-
V Pixhawk systému zřejmě chybí nástroj, jak prodlužovat vodiče I2C sběrnice. Zřejmě by to měl být modul, který na protilehlých hranách bude mít běžné JST-GH konektory používané pro I2C.
Funkci mod…
-
Hi there. I am using the Hillcrest FSM300 board with an Arduino Mega and your code works perfectly. I was wondering if you have ever tried to communicate via UART instead of I2C? I tried converting…
-
-
Board: LOLIN32
Core Installation/update date: Main + latest stickbreaker patched i2c files
IDE name: Arduino IDE
Flash Frequency: 40Mhz
Upload Speed: 115200
### Description:
Several times an…
-
### Hardware:
Board: LOLIN32
Core Installation/update date: Main + latest stickbreaker patched i2c files
IDE name: Arduino IDE
Flash Frequency: 40Mhz
Upload Speed: 115200
…
-
Following on from the work by @jkriege2 [here](https://github.com/KiCad/kicad-library/issues/1398#issuecomment-313969813)
| Library Name | Description | Previous Name | Notes |
| -----------------…