-
Hello!
I'm experimenting with Raspberry Pi, SPI-connected NRF24L01 module and this library.
In NRF24L01 promiscuous mode I see some data on RX, but I definitely don't see packets from my Logitech mo…
-
**Describe the bug**
I wrote a C++ program using Npcap SDK in Windows environment where I have enabled Wi-Fi in monitor mode. But the program is unable to capture Wi-Fi 802.11 Beacon packets. Using W…
-
Hi, I would like to ask for help for one of our project.
We are trying to write a decoder for ax.25 frames on our SX1268 chip. We have tried a lot of things, but the reception still does not work …
-
## General symptoms
We are using an SX1268-based radio module by EBYTE (E22 400M33S) on a ESP32-S3 development board (own PCB). When adjusting the [PingPong Sketch](https://github.com/jgromes/Radio…
-
Hello, I have installed successfully as mentioned.
But I have an error like picture. 1 and 2 occurred same error.
![IMG_3352](https://github.com/user-attachments/assets/53c5b4bd-b5fb-4756-93e1-0d4cd…
-
## Current Behavior
I have a BetaFPV Super D receiver 2.4 GHz, using it in Diversity mode. It appears the receiver always locks on Radio/Antenna 2 and never switches to the other antenna, whatever …
-
Using 3 microbits, 2 transmitting and one counting packets, not all packets are being recieved by the counter.
`yap.py` 19682 received 318 dropped
`message.py` 1822 received 178 dropped
[counte…
-
Is anyone else also facing the issue, that the CPU utilization reaches 100% on the receiving side?
I use a Pi4 2GB and have a constant 100% cpu utilization on one core.
![image](https://github.com…
-
Hi there,
I am trying to use the LoRa transmitter, i wanted to try this by running the example code "LoRaSender" but i constantly have this message on the serial monitor :
`
-----------------…
-
### Category
Hardware Compatibility
### Hardware
Heltec v2.1
### Firmware Version
2.3.9.f06c56a
### Description
Device: Heltec V2.1
Firmware: 2.3.9.f06c56a Alpha
Error: E (29334) gpio: gpio…