-
Dear Wolle,
In my opinion the balance slider in the equalizer works in the wrong direction. Slider to the right, only left channel, slider to the left, only right channel. Tested with a relaible L …
-
Hi,
Thank you for your effort. Your image working very well in my NanoPi NEO (256M).
I want to use my Nanohat PCM5102a, but it's only working specific kernel version that provided by allwinner.
-
firstly, thanks for your work on this subject.
I was looking to replace the PCM5102a with a better dac. I noticed that the STM32F411xE configuration could provide the masterclock. what would the fre…
-
Would it be possible to have the ESP32-S3 show up as a USB Sound card? Then whatever audio it receives from the host would get sent out as I2S to a DAC (like the PCM5102A). I found this exact same thi…
-
I am planning to release a new version that can optionally use a simple PCM5102A dac (I2S) instead of the VS1053 board. MP3 is already functioning. I am working on the AAC and maybe Bluetooth A2D.
-
System Details
============
**System**: Raspberry Pi 4B + Raspberry Pi OS Lite (Bookworm, 64bits, No X)
**SDL version**: 2.26.4
**Audio devices** (names retrieved using `SDL_GetAudioDeviceName`):
…
-
Thats all
I Will to share with You an PCB design of the implementation of stm32F411 with Pcm5102A from other variant
[Gerber files](https://drive.google.com/file/d/16NNwvrwQJbw5402ePAMmbVkY0LZwi…
-
Hi I am unable to interface the i2s microphone (https://www.adafruit.com/product/3421) with the beagle bone green because there are no devices listed with
arecord -l
arecord: device_list:270: no s…
-
This image:
ESP32-audioI2S/additional_info/ESP32_I2S_PCM5102A.JPG
shows 5 volts connected to the "VIN" pin on the PCM5102 board,
however, the Texas Instruments data sheet says the Vcc supply shou…
-
See https://github.com/fruit-bat/pico-zxspectrum/pull/138