-
#warning "legacy pcnt driver is deprecated, please migrate to use driver/pulse_cnt.h"
Arduino IDE 2.3.2
#include
Using Two Encoders 600ppr. The Example codes give the same Warning. But the Enc…
-
Greetings to the esteemed author:
Recently I've been carefully analyzing your project ns3-rdma-master code, and I found some member variables in BroadcomNode hard to understand. In order to better …
-
Hi,
Thanks for sharing the library!
While I build the example with no error, when I flash the build code into the HW, and I got the following error:
Serial debug message:
E (34) pcnt: _pcnt_…
-
This is probably feature bloat, but the module has a CLKOUT feature on DIO5, which can probably be used with the PCNT peripheral with esp32. The GPS PPS pulse can be used with a software interrupt whi…
-
Please update the library. It has too many compatible issues.
The compilation output is:
`c:\Users\woodl\Documents\Arduino\libraries\FreqCountESP\src\FreqCountESP.cpp: In function 'void onHLim(void*…
-
Hi! I don't know if this happened to anyone but when i try to compile the example using PlatformIO, it gives me this error:
```
src/main.cpp: In function 'void pcnt_intr_handler(void*)':
src/ma…
-
we need to reach the tach from each fan, and use it to compute RPMs, which will be reported over mqtt.
-
### Is your feature request related to a problem?
In pulse_cnt.c the input pin for the pulse counter is set with pull ups enabled. Some people, like me, do not want that.
### Describe the solution y…
-
**Describe the problem you have/What new integration you would like**
Currently, the HLW8012 library forces you to define 3 pins (SEL, CF and CF1) in order to use it.
This library uses pulse_cou…
abl20 updated
3 months ago
-
Parsing perf stat JSON output throws an error when using the perf stat command Wrapper (PerfStatWrap)
Error thrown:
```
Traceback (most recent call last):
File "/home/taoufik/Documents/PAAE/be…