-
The plantower is producing incredibly noisy PM data. When we take the median over intervals, we don't see problems, but the raw data is unintelligible. The YPOD did not have this issue, see here for t…
-
#### Description
The PMS7003 is a particle sensor (PM1, PM2.5 and PM10) used into Air Quality endpoints and stations.
The PMS7003 sensor is the 7th generation of the PMSx003 series developed by …
-
I have seen a couple of times that a device has some "unreal" sensors in it.
![image](https://github.com/fablabbcn/smartcitizen-api/assets/13301321/2ea31399-7aba-4ec6-bbb9-4a4301bf9dbb)
I don't …
-
I had mentioned this problem in [another issue](https://github.com/opendata-stuttgart/sensors-software/issues/614#issue-546088589). My problem is that SDS sensors and PMSA003 have a huge difference in…
-
This is the sensors and components wish list:
~~- [x] MQ2 (limited lifetime, comsumes too much power, needs calibration)~~
~~- [x] MQ135 (limited lifetime, comsumes too much power needs calibratio…
-
This is the Plantower UART PM25 sensor which also has CH2O and T+RH on board
-
# Arduino - PM2.5 Sensor | Gabriel J. Csapo
This tutorial goes over how to use the Plantower PMS7003 PM2.5 Sensor 💨!
[https://gabrielcsapo.com/arduino-pm2-5-sensor/](https://gabrielcsapo.com/arduino…
-
> We are working on a pilot project to build a crowdsourced PM2.5 air pollution sensor network.
Details in:
https://wiki.mozilla.org/Sensor_Web
I contacted c hsiang about our project.
Marwe updated
8 years ago
-
The revspace project uses these, they're approx £20 in BoM, but incredibly useful. Would be a great way to quantify the dustiness of the CNC room, and when a mask might be required.
https://revspac…
-
This is truly and awesome project.
To make a real difference to its "competitors" like ESPHome, I would wish for some more sensor support:
| MFR No | Manufacturer | Functions …