-
> > Now here's my problem - is there a way for me to switch between USB and MPG UART without having to reflash the microcontroller (STM32F407)? Or can I switch between the USB serial and…
-
In my G-Code file I have several M66P0L4Q5.000 commands and it works as expected. But after applying height map this command disappear everywhere. Even my custom G-Code M101 is remain but M66P0L4Q5.00…
Varra updated
7 months ago
-
Hi,
I'd like to be able to reset, unlock and get realtime status reports while in alarm or estop, I kind of hacked the code together getting an inspiration from the Log2k plugin code, it "seems" to w…
yaapu updated
6 months ago
-
Looks like in some cases backlash compensation can cause position drift. My machine has imperial balls crew(_5.08 mm or 1/5 of an inch_), my motor set to 4000 micro steps and connected directly to bal…
-
First, is there a proper discussion forum (Discord, Slack, etc.) for questions that may not be an "issue"?
To make a long story short, I’ve converted a mini mill to CNC. I still want to manually co…
-
M10CUBE format CNC Brakeout Nucleo64
-
I'd like to try out the code for the BTT SKR E3 Mini v2.0 board that's being worked on in #2. I understand that Eclipse is grblHAL's IDE of choice but I'd prefer to use something that's less of an in…
-
Hi @zeevy @terjeio
I am switching grbl to grbl hal is it possible to connect grbl hal with this app i am trying with bluetooth but it's not working but with ugs i can connect arduino due with grbl ha…
-
Hello,
I use Blue Pill but try to re-map pins difference from CNC3040 and need UART1. This is a map file that I try to modifications and What other files do I need to edit?
![1693461534130](h…
-
I have a wifi370 controller for my rgb-LED's. Now I want to control it with pimatic, but I'm unable to program a plugin or some kind of connection for pimatic. There is a driver for the wifi370 contro…