-
Pozdrav vec nekoliko dana pokusavam da ozivim klimerka..
dakle..koristim NDU ESP8266 (CP2102 cip) , senzore koji su neophodni i konstantno dobijam isti odgovor a to je
[PMS] Air Quality Sensor (P…
-
Hey! First of all thanks for your work on this project. I really appreciate it. It's the first time I ordered a custom PCB and I hope it will bring me to making more custom devices.
I have ordered …
-
#### Description
The PMS7003 is a particle sensor (PM1, PM2.5 and PM10) used into Air Quality endpoints and stations.
The PMS7003 sensor is the 7th generation of the PMSx003 series developed by …
-
perhaps i overlook something, but it looks to me that there is no handling of sensors of type PMS7003 is included yet.
(despite the fact that it is included in airrohr sensor's firmware since a few …
-
I found most of blogs are serial.Serial, how to use gpio? thx
-
https://github.com/ProgramistaPrzemyslaw/PMS7003-Air-Quality-Tester/blob/bbe8a8b4148b7ccc2190f1f639cb6b615fc862ef/src/main.ino#L1
nie rozumiem co to jest include, proszę wytłumaczyć.
PZDR,
MS
-
# Arduino - PM2.5 Sensor | Gabriel J. Csapo
This tutorial goes over how to use the Plantower PMS7003 PM2.5 Sensor 💨!
[https://gabrielcsapo.com/arduino-pm2-5-sensor/](https://gabrielcsapo.com/arduino…
-
The revspace project uses these, they're approx £20 in BoM, but incredibly useful. Would be a great way to quantify the dustiness of the CNC room, and when a mask might be required.
https://revspac…
-
**Describe the problem you have/What new integration you would like**
hi
Yesterday I have tested my prototype of air quality station with pms7003 and found that PMSX003 reports data too freq…
-
It would be convenient to support two UARTs on 461x boards as well.
> Small correction: Only in 4630 and 4801 (To support PMS7003 and RS485 transceiver respectively) we enabled extra HW serial USAR…