-
### Checklist
- [X] I have updated to the latest available Home Assistant version.
- [X] I have cleared the cache of my browser.
- [X] I have tried a different browser to see if it is related to my b…
-
Hi! I have some questions about Caliptra.
Question:
1. the detail of the key management
According to existing documents, the Key vault module cannot meet the requirements of key management because…
diswd updated
1 month ago
-
Hi, this is not an issue but i don't know how to do it. I want to measure at least approximate power consumption but I don't have extra space in my circuit breaker box for some Shelly relay or somethi…
-
### Device model / 设备型号
[cuco.plug.v2eur](https://home.miot-spec.com/s/cuco.plug.v2eur)
### Component version / 插件版本
0.7.13
### HA core version / HA版本
2023.10.1
### Integrated mode /…
-
**Checklist:**
- [x ] I updated to the latest version available
- [x] I cleared the cache of my browser
**Release with the issue:**
3.2.3
**Last working release (if known):**
NA
**Bro…
-
### What happened?
Since 2024-08-29 all of my TS011F_plug_3 plugs doesn't update their electrical measurements. I guess I did the Zigbee2MQTT v1.39.1 on my Home Assistant at that time - not sure ex…
-
For determining the amount of power savings required by a low-current kernel, we will need some hardware to measure the current and voltage draw off of USB.
-
Hoping to save power I set my display to switch off - but it remains on all the time.
-
Hi, shameless plug here: https://github.com/pix/heystack-nrf5x
I managed to convert an old Tile tag (with an nrf52810) to Haystack.
I used alcatrava's firmware as a base too and fixed some potenti…
-
* CodeCarbon version: 2.3.1
* Python version: 3.9.2
* Operating System: Debian GNU/Linux 11
### Description
I have a question regarding the `cpu_power`, `gpu_power`, and `ram_power` values in …