-
Hello @rdugan,
I would like to program a small app that puts the miner in sleep mode and switches to work mode when needed.
Do the Icervicer miners have such a WebApi connection?
Such an app wo…
-
Two problems:
1. Rust drops `stations` that are added to `self.stations`, apparently something is wrong with ownership here:
https://github.com/CertainLach/VivePro2-Linux-Driver/blob/8982075490c2…
-
### SOC
ESP32
### Lora IC
HelTec WiFi LoRa 32 (V3)
### Product Link
https://wx4tc.com/?page_id=2792
### Description
This is being rapidly prototyped. It is NOT a new LoRA / microcontroller.…
-
# Laptop Power Management
Having Fun with Technology
[https://christitus.com/laptop-power-management/](https://christitus.com/laptop-power-management/)
-
I see in your screenshot that CPU pkg power should idle at around 2.5W. I have the i7 10875H and it never goes below 5.5W. Did you do something post installation to get those numbers?
-
## Use Case
As an admin, I need to be able to select the right settings for power and performance,
so that I can make sure that the server is operating based on the requirements.
## Design Review…
-
Zunächst einmal ein dickes Lob für die Anpassung der Tasmota-Firmware an den Livy-Ring.
Um ihn auch dauerhaft in die Hausautomatisierung einbauen zu können, fehlt eigentlich nur noch ein Power Manag…
-
If deemed to be necessary, the 5V bus shall be conditionally isolated into {P5V_PWR} and {P5V_LOG} -- the former handling high-power sections, and the latter powering the microcontroller.
Net {P5V_…
-
Using Cinnamon 3.2.7 (with Mint 18.1) on Asus UX410UAK laptop. This laptop will not charge the battery until its level drops below a given threshold.
When the device is plugged in but not charging …
-
### Description
There should be a way to disable Entropy source completely and/or partially, if not used. Currently https://opentitan.org/book/hw/ip/entropy_src/doc/registers.html#module_enable is us…