-
Looking through the python library, I can't quite tell what the standard behavior in the PowerSupply is (it takes a port parameter, and it seems like if the port is specified it might try to read from…
-
How to use LED program?
Can it use like a standard PowerSupply?
When I set LED program, and run CHARGE, I get alarm "battery disc."?
With connected battery It works, without - no.
How to use LED p…
-
I'm testing test_powersupply_readings.robot
It is necessary to read powerinputwatts and poweroutputwatts, but I refer to the correction of the issue and set LABEL_power1=psu1_input, which contains …
-
check command `vcgencmd get_throttled`
-
Redfish in 2020.4 added PowerSubsystem, ThermalSubsystem, Fan, PowerSupply, PowerSupplyMetrics
https://www.dmtf.org/sites/default/files/Redfish_Release_2020.4_Overview.pdf
These are a huge impro…
-
First off, thanks for your great project and your talk!
I still have some more questions about the hardware setup:
1. Has anyone had success with the **Raspberry Pi 3 B+** (+ **Pomona 5250**) on *…
-
[Uploading Huawei-EPW750-12A-datasheet.pdf…]()
请教一下,华为EPW750-12A读不到数据,日志有读到IIC设备地址:
[13:26:20][I][i2c.arduino:102]: Found i2c device at address 0x57
[13:26:20][I][i2c.arduino:102]: Found i2c devi…
-
Same reason as https://github.com/opencomputeproject/HWMgmt-OCP-Profiles/issues/25.
Redfish in 2020.4 added PowerSubsystem, ThermalSubsystem, Fan, PowerSupply, PowerSupplyMetrics
https://www.dmtf.…
-
I'm using check_hpasm v4.9 via SNMP against a ProLiant DL360p Gen8 with iLO firmware 2.82
The iLO web interface is reporting:
```
Fan Block 1 System OK 94%
Fan Block 2 System OK …
-
Here is the code I am trying to run:
`import pyvisa
pyvisa.log_to_screen()
rm = pyvisa.ResourceManager('C:\\Windows\\System32\\visa64.dll')
print(rm.list_resources())
`
Even though I have …