-
Hi,
the PT226x (original supported protocol) is almost fixed.
May it is time to implement the new comands for the alternative EFM8 firmware:
https://github.com/Portisch/RF-Bridge-EFM8BB1
**0…
-
### Latest firmware used?
Keil 8051 V9.53
Tasmota 8.0.1
### Information
Sonoff RF Bridge
### Sniffed data
None......... thats the issue, read on.
### Setup
1 Sonoff Bridge
4 Sonoff DW1 …
-
### Latest firmware
Tested with Version 0x04
### Information
I'm trying to define a new protocol for 2 motion sensors. I've sniffed the following data for both:
Sensor A
{"RfRaw":{"Data":"AA B1…
-
I have a remote controller looking exactly like this one on eBay: [361529945280](http://www.ebay.com/itm/361529945280) and a XY-MK-5V receiver. The controller is said to have the PT2260 chip, which is…
wszak updated
7 years ago
-
### Latest firmware used?
I'm currently using the latest firmware located here.
https://github.com/Portisch/RF-Bridge-EFM8BB1/releases
### Information
What device you try to sniff data from? Des…
-
Portisch kindly added the [Libra protocol definitions](https://github.com/Portisch/RF-Bridge-EFM8BB1/issues/118) to the RF_Protocols.h so I can use 0xA6 sniffing to pickup the signal however I need to…
-
### Latest firmware used?
Tested using:
Tasmota 6.5.0
https://github.com/Portisch/RF-Bridge-EFM8BB1/releases/tag/0x04
and [newest binary](https://github.com/Portisch/RF-Bridge-EFM8BB1/blob/master/…
-
### Latest firmware used?
latest pull from master branch
### Information
Powerplug REV Typ 008341C
I got a problem to understand the difference between the two sniffing/learing command A6 and …
-
### Latest firmware used?
- Yes, installed yesterday from this repo.
- Sonoff-Tasmota 6.5.0
### Information
Doorbell knob
### Sniffed data
```
17:41:55 MQT: tele/sonoff-rf-bridge/RESULT = …
-
Have a new CO sensor and the Rf Bridge not received code when I push the test buttons.
Only show this if I use the Rfraw 177:
`20:16:47 MQT: tele/sonoff_rf/RESULT = {"RfRaw":{"Data":"AA B1 04 0…