-
Hello, I'm from China, I'm a student in Shanghai, I'm a big fan of yours, I'm very interested in FPGA in my spare time, I want to ask if you can provide top-level design drawings or arch drawings, bec…
-
Hi @hst10 , may i know ur pylot support one tranied NN model from pytorch to hls code process for U200 board? if yes, how to set up this env. thanks
-
Hey Sara,
Thanks for your working putting this together.
Can you post or recommend .ipynb (jupyter notebooks) that work with and demo the RF data converters on the RFSoC for the ZCU216?
I t…
-
Pynq version: 2.5.2
Board: PYNQ-z2
an error raise up when run the last step "pynq get-notebooks pynq-helloworld -p ."
-
On PYNQ 2.5
REVISION : Release 2019_10_03 3f63450
Board: ZCU104
Brand new install on new SD supplied with board
Run from terminal: sudo pip3 install pynq-helloworld
returns:
edited to h…
-
hello, i used pynq-z2 board for simulating in vivado, but the simulation failed due to over utilization of io ports. The neuron file requires 4748 io ports but the board contains only 255 ports... cou…
-
Hello!
DPU Target: DPUCZDX8G_ISA1_B4096
Vitis Verison: 2.5.0 (CPU)
I am using the Xilinx-RFSoC ZCU 111 for a custom neural net, I am using that with combinations to some other tools to create s…
-
Hello! I would like to know what is the status of the project. I want to use it but with PYNQ board. Do you have any documentation about how to use migen and vivado to make the hardware wrapper?
T…
-
I'm trying to work through the 04_network_processor notebook on a PYNQ-Z1 board running the most recent version of the PYNQ image (v2.3).
I'm running into the some issues with the LinkManager cell…
-
If the SD card has been corrupted, you can re-program it using an SD-Card reader with the PYNQ image following the instructions in the link below:
https://pynq.readthedocs.io/en/v2.3/appendix.html#wr…
alk15 updated
5 years ago