-
after seeing your work
I would like to know if for improvement you have thought about scapy python
for the tests
-
### Brief description
pkt = IP(dst=dest_addr, ttl=hop) / ICMP()
reply = sr1(pkt, verbose=0, timeout=timeout)
Reply is None. Everything worked fine in the previous version
### Scapy version
2.5…
-
On [eaphammer](https://github.com/BlackArch/blackarch/blob/master/packages/eaphammer/PKGBUILD) several dependencies are specified like:
```
depends=('python' 'python-argparse' 'python-tqdm' 'dnsmasq…
-
Disclaimer: I used AI to help write this report because English is not my first language, I apologize if anything is unclear or too detailed. Let me know if you need any clarifications
I'm encounte…
-
### Brief description
When default native super sockets are used in Linux, Scapy receives only first 150 answers while packet dump confirms that no drops take place. The problem gets solved when li…
-
### Brief description
When using Scapy's `sniff()` function to read from a pcap file, a zombie `tcpdump` process is left behind if the `filter` argument is set to a non-`None` value. This issue occur…
-
### Brief description
The telegram transcript in Scapy does not appear to be complete. Telegrams that are present in a reference recording with Wireshark are missing. During the telegram recording,…
-
Hey everyone, I'm just learning since I could not find any solution and was not able to figure it by myself. Can anyone help me please?
I have trouble to instal Scapy_Http. I have latest version of …
-
Getting the following messages/error when installing scapy-python3 on windows 10 with python 3.6.4?
****
INFO: Can't load Python libreadline or completer
INFO: No IPv6 support in kernel
WARNING: N…
-
Several tests will work with slirp, but not the UDP test as it stands, because it has an IPv6 part, and there doesn't seem to be a way to forward ports to IPv6 addresses with slirp. For example, `hos…