-
Greetings, The DB for XC6SLX16 is available? If not, is this DB_FPGA with RP2040 COMPATIBLE with your QMTECH XC6SLX16 DDR3 board?
Thanks in advance
-
This is observed when connecting a PicoLemon HyperRAM module to the PMODs of a QMTech Wukong board.
I suspect the problem is due to the increased latency through the board traces and PMODs.
-
It was pretty easy to port this board, since it is very similar to the existing 5cefa2.
[qmtech_5cefa5.zip](https://github.com/litex-hub/litex-boards/files/9526414/qmtech_5cefa5.zip)
-
Hi,
Great project, thank you for your efforts.
Are you planning any hardware updates in the future to support current QMTech Xilinx boards and/or refresh the components on the board that are bec…
-
I am trying to add SPI support to Qmtech Wukong (v2) gateware. I modified platform file as following:
```diff
--- a/litex_boards/platforms/qmtech_wukong.py
+++ b/litex_boards/platforms/qmtech_wukon…
e-yes updated
6 months ago
-
Hi Pavel,
cool project! I wondered why you didn't choose the LTC22xx family of 2-channel ADCs. There you can find pin-compatible ADCs from 12bit @ 25MSps up to 14 bit @ 105MSps, so people could cho…
-
First, thank you so much for working on litex! It is an amazing help when learning about SoCs, FPGAs and how to approach building such systems.
This is not an issue I urgently need to resolve for m…
-
Hi Neal,
I made a PCB that uses an inexpensive ($20ish on AliExpress plus shipping) QMTECH FPGA card that runs everything. The [card is up for sale on Tindie](https://github.com/douggilliland/Multi…
-
I have Xilinx Kintex XC7K325 board and ECP5 color light 75b board and openFPGALoader works fine with ft2232 cable. However, I am not able to load the bitstream using CH347. I tried both Xilinx and Lat…
-
jrrk2 updated
2 years ago