litex-hub linux-on-litex-vexriscv issues

litex-hub / linux-on-litex-vexriscv

Linux on LiteX-VexRiscv

BSD 2-Clause "Simplified" License

550 stars 174 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Error: unable to open ftdi device with description '*', serial '*' at bus location '*'

#399 jjagielo opened 23 hours ago
5
java.lang.ClassNotFoundException: vexriscv.demo.smp.VexRiscvLitexSmpClusterCmdGen at java.net.URLClassLoader.findClass(URLClassLoader.java:387)

#398 jjagielo closed 1 day ago
2
Utilizing the PL to DDR interface of Zynq to define `main_ram`

#397 jahagirdar opened 3 days ago
3
Support for 1bpp framebuffer

#396 machdyne opened 1 week ago
0
ImportError: cannot import name '{board name}' from 'litex_boards.targets'

#395 jjagielo closed 1 week ago
7
ERROR:SoC:LOCALIP1 Constant already declared

#394 jjagielo closed 1 week ago
3
./sim.py hangs indefinitely

#393 jjagielo closed 2 weeks ago
1
linux doesnt boot

#392 LaneaLucy closed 2 weeks ago
4
Error: unrecognized opcode `csrr s5,0xf14', extension `zicsr' required

#391 phillippZZ opened 3 weeks ago
9
SpinalHDL git repository not detected

#390 jjagielo closed 2 weeks ago
16
ResolutionError$CantDownloadModule: Error downloading org.scala-sbt:sbt:1.6.0

#389 jjagielo closed 3 weeks ago
7
No Module Found

#388 jjagielo closed 3 weeks ago
1
extension zicsr is missing

#387 LaneaLucy opened 4 weeks ago
6
running on hardware

#386 azaad-deepgrid opened 4 weeks ago
5
Error with the Prebuilt images

#385 azaad-deepgrid closed 4 weeks ago
1
Update make.py

#384 akioolin opened 1 month ago
0
After booting to [10.122727] Waiting for root device /dev/mmcblk0p2... there is no response.

#383 hex55 closed 1 month ago
4
Boot Crash Afer --============= Liftoff! ===============--

#382 hex55 closed 1 month ago
7
Ethernet not working on genesys 2

#381 elialaz closed 1 month ago
10
Add support to Colorlight 5a-75e

#380 roby2014 opened 2 months ago
0
sim.py: Could not initialize class sbt.internal.parser.SbtParser$

#379 roby2014 closed 2 months ago
6
Add support for CAN bus on Linux to Arty, Nexys & Genesys2 Board

#378 disdi opened 5 months ago
0
Trying to port for TUL PYNQ Z2 Error [KeyError: 'main_ram']

#377 ZeroX29a closed 5 months ago
5
Can add official support for Sipeed tang primer board (using Anlogic’s FPGA EG4S20BG256)？

#376 hai4john opened 6 months ago
1
Failed to modify “boot.c” and the riscv64-unknown-elf/bin/ld report an error “undefined reference to `__heap_start'”

#375 May15356 opened 6 months ago
0
How can I capture the waveform of the portion where the C program was executed in the simulation using sim.py?

#374 nohahanon closed 6 months ago
2
How can I execute a C program on linux simlulated by sim.py?

#373 nohahanon closed 6 months ago
1
video_terminal : blank appearing on exported screen when using hdmi connecting

#372 allrighteveryday opened 7 months ago
0
Is there a reason why an old riscv toolchain is recommended in the README.md?

#371 ratzupaltuff opened 7 months ago
2
how to get the freq of the cpu

#370 huangshaoxin opened 7 months ago
0
Using Litescope on ULX3s

#369 LucasKl opened 7 months ago
0
Problems with HDMI display on Linux

#368 mmx-114514 opened 8 months ago
12
Is there any way to run python programs in linux-on-litex-vexriscv

#367 allrighteveryday opened 8 months ago
4
upload bitstream to Genesys2 board done but chasing LEDs animation doesn't start

#366 tparng opened 8 months ago
1
No serial on Genesys 2 board

#365 newinnovations opened 8 months ago
2
when I boot linux images into Gowin tang primer 20k，it freezed.

#364 huangshaoxin closed 8 months ago
0
linux.config: Use 100 Hz as timer tick rate

#363 stettberger closed 8 months ago
1
ULX3S: Quad-core system hangs at FPGA manager framework

#362 stettberger opened 8 months ago
6
when I load bitstream to sipeed_tang_primer_20k,there was an error

#361 huangshaoxin closed 8 months ago
0
when i use './sim.py',riscv64-unknown-elf-gcc raised "error: -march=rv32i2p0_ma: unsupported ISA substring '2p0_ma'"

#360 bg51717 closed 7 months ago
2
sipeed tang primer 20k freezes after the linux image is imported（高云20k开发版在导入linux镜像后出现卡死情况）

#359 heisuo opened 8 months ago
6
command make on Linux

#358 BobMa0420 closed 8 months ago
10
command make on linux

#357 BobMa0420 opened 8 months ago
0
Missing riscv64-unknown-linux-gnu-gcc-ar

#356 zacky1972 opened 8 months ago
0
how to run coremark to test my cpu by litex?

#355 1487021 closed 8 months ago
19
I cannot boot linux. [LITEX-TERM] Got unexpected response from device 'b'E''

#354 nohahanon closed 8 months ago
34
Some issues when I boot on tang-primer-20k

#353 kevinsu20 opened 9 months ago
1
How can I send files to linux?

#352 nohahanon closed 6 months ago
5
issue when boot on tang-primer-20k

#351 kevinsu20 closed 9 months ago
0
Butterstick FPGA does not open UART after successful flash

#350 Goof512 opened 9 months ago
1