-
This is observed when connecting a PicoLemon HyperRAM module to the PMODs of a QMTech Wukong board.
I suspect the problem is due to the increased latency through the board traces and PMODs.
-
Greetings, The DB for XC6SLX16 is available? If not, is this DB_FPGA with RP2040 COMPATIBLE with your QMTECH XC6SLX16 DDR3 board?
Thanks in advance
-
Hi Pavel,
cool project! I wondered why you didn't choose the LTC22xx family of 2-channel ADCs. There you can find pin-compatible ADCs from 12bit @ 25MSps up to 14 bit @ 105MSps, so people could cho…
-
I am trying to add SPI support to Qmtech Wukong (v2) gateware. I modified platform file as following:
```diff
--- a/litex_boards/platforms/qmtech_wukong.py
+++ b/litex_boards/platforms/qmtech_wukon…
e-yes updated
6 months ago
-
Hi,
Great project, thank you for your efforts.
Are you planning any hardware updates in the future to support current QMTech Xilinx boards and/or refresh the components on the board that are bec…
-
I have Xilinx Kintex XC7K325 board and ECP5 color light 75b board and openFPGALoader works fine with ft2232 cable. However, I am not able to load the bitstream using CH347. I tried both Xilinx and Lat…
-
It was pretty easy to port this board, since it is very similar to the existing 5cefa2.
[qmtech_5cefa5.zip](https://github.com/litex-hub/litex-boards/files/9526414/qmtech_5cefa5.zip)
-
jrrk2 updated
2 years ago
-
Hey, I want to build litex project with ethernet peripheral. I succesfully builded project and generated bit file. I'm trying to loading boot.json file but I got this error.
![image](https://github.…
-
Hey,
First of all, great work on the firmware. However, I've noticed that despite defining `#define BOARD_TYPE BOARD_PICO`, I am unable to control the `pin_rst` as "emulate open drain with pull up …
D4VF0 updated
8 hours ago