-
### Before submitting this form
- [X] I have checked that there hasn't been a similar issue submitted in the past
- [X] I have updated the issue title to something relevant and clear to understand t…
-
### Before submitting this form
- [X] I have checked that there hasn't been a similar issue submitted in the past
- [X] I have updated the issue title to something relevant and clear to understa…
-
332022-09-23 09:35:14.201 am errorQolSys IQ Alarm Panel: Unhandled device type Tilt
dev:332022-09-23 09:35:14.200 am errorQolSys IQ Alarm Panel: Unhandled device type Tilt
dev:332022-09-23 09:35:14.…
-
Hi,
My qolysys gateway is not receiving sensor change states whenever the sensor state changes and is displayed on the panel. If I reboot the panel, then on panel startup I receive all the sensor s…
-
Would you be interested in extracting / publishing a library to talk to Qolsys?
To me, AppDaemon and MQTT add extra complexity. I'd rather have a more tradition Home Assistant integration. I assum…
-
I'll add details when I can reproduce this reliably. After restarting home-assistant the Qolsys panels blocks requests until the panel is rebooted. This doesn't happen every time and this is what gets…
-
The alarmdotcom maintainers don't have direct access to all Alarm.com devices. We need your help to support new devices.
Please open one issue per device.
**Which device would you like us to sup…
-
### Before submitting this form
- [X] I have checked that there hasn't been a similar issue submitted in the past
- [X] I have updated the issue title to something relevant and clear to understand t…
-
### Before submitting this form
- [X] I have checked that there hasn't been a similar issue submitted in the past
- [X] I have updated the issue title to something relevant and clear to understa…
-
### Before submitting this form
- [X] I have checked that this sensor type was not suggested for addition before; I know that it could
be in open or closed issues, and if there was another issue ment…