-
@gauteh which firmware version do you use? :) Do you usually use a turn key binary from https://github.com/jerabaul29/OpenMetBuoy-v2021a/tree/main/legacy_firmware/binaries (if so, which one? I guess o…
-
@tnn77 @T-Kodaira
- I now pushed a 2-ways-communication version of the buoy without the need to use the qwiic switch:
- firmware: https://github.com/jerabaul29/OpenMetBuoy-v2021a/tree/main/legac…
-
I'm not sure if we have already used all the I2C GPIOs but if not, it could be useful in some applications have have a [Qwiic](https://www.sparkfun.com/Qwiic) connector available for expansion.
-
### Hardware
- [Silicon Labs xG24 Explorer ](https://www.silabs.com/development-tools/wireless/efr32xg24-explorer-kit?tab=overview)
- [Adafruit DS248x Breakout Board](https://www.adafruit.com/prod…
-
### Board
[SparkFun Qwiic Button - Green LED](https://www.sparkfun.com/products/16842)
### Notes
* Existing [Driver](https://github.com/sparkfun/Qwiic_Button_Py)
-
I'd be interested in a version of this board that included a Qwiic connector next to the Grove. Would you be interested in editing your project to add this?
Of course I can fork and try to add it m…
samuk updated
8 months ago
-
Hello,
I am working with Nvidia Jetson Orin NX boards on both a Nvidia dev board and a custom PCB. We are utilizing the Sparkfun CAT24C512 EEPROM. I am currently running into an issue where I can no …
-
As Suggested by @ukBaz :
A mezzanine with Qwiic connectors on board.
The following components will be on board.
1: Couple of Qwiic connectors for each i2c bus.
2: Level shifters for the Qwiic co…
ric96 updated
5 years ago
-
Hi,
I'm using Nvidia Jetbot with JetPack 4.6. I'm using the standard Spark Fun setup and double checked that the wiring are right according to SparkFun assembly guide [here](https://learn.sparkfun.co…
-
Hi
I think it would would be great to have [Qwiic connectors](https://www.sparkfun.com/qwiic) as an option for indoor use. Since it was space on the PCB to add this with only minor changes to the l…