-
Might be easy for quick setup of standard values depending on machine type
-
The documentation should suggest `brew install visual-studio-code` ;)
(See [Formula](https://formulae.brew.sh/cask/visual-studio-code))
Additionally, PlatformIO can also directly be installed wit…
kjyv updated
9 months ago
-
When using https to send data to InfluxDB (e.g. with InfluxDB Cloud) the client needs to have access to the server certificate to establish trust. Since most certs expire in just a couple of months it…
sway updated
11 months ago
-
Problem: Programm im ESP friert ein.
Auslöser: InfluxDB server war Aufgrund eines Stromausfalls nicht neugestartet, aber in der userconfig konfiguriert.
Hardware: ESP32
Config:
```
// INFLU…
-
Quickmill uses a cold start Kp of 250 which is out of defined parameter range
-
The PID loop suffer under huge delays on ESP32 boards. The issue did not occur on the ESP8266 as i know so far.
I suffered from delays up to 900ms.
Here are some logs indicating the problem:
```
…
-
When using a scale the default sample rate value in the HX711_ADC library is unusable
HX711_ADC-1.2.7\src\config.h
line 27:
#define SAMPLES 2 //default value: 16
value 16 is way too slow (…
-
Taster Modus für Kaffeebezug. Beim Vollumbau der Rancilio würde ich gerne den normalen Ein/Aus-Schalter für den Bezug durch einen Taster ersetzen.
Taster kurz Ein: (Preinfusion &) Kaffeebezug
Tast…
-
__Steps to reproduce:__
Environment Status Duration
------------- -------- ------------
nodemcuv2_usb SUCCESS 00:00:38.674
nodemcuv2_ota SUCCESS 00:00:29.991
esp32_usb FAILED …
-
Hallo Team,
ich verwende:
DISPLAY = 1
DISPLAYTEMPLATE = 1
DISPLAYROTATE = U8G2_R0
Bei einem Kaltstart (auf dem Display die Kaffeemaschine) ist in der Statuszeile oben der Text "MQTT" in zu gr…