-
Installed Ratgdo on two garage openers:
1. Newer Sec+ 2.0 door and works perfectly
2. Older Sec+ 1.0 door and it stops after 1/2 second either opening or closing which is baffling me on how to get wo…
-
I just set up and installed my ratgdo after flashing the latest version of the HomeKit firmware, but am finding it unresponsive for long periods - both via the Home app on my phone, and the browser. I…
-
I have had RATGDO's installed, configured and working well for a couple weeks on two identical 2018 Chamberlain B970 MyQ openers. Just today one of them stopped controlling the opener. Both are config…
-
I have installed Home Assistant in a Docker on my Unraid server for the purposes of being able to update the firmware. I am using Homebridge for everything else like controlling the door.
I got Rat…
-
Hi, I built the ESP32 board using [this schematic ](https://github.com/Kaldek/rat-ratgdo/blob/main/schematics/ratgdo%20open%20source%20ESP-32_schem_v6.png) and connected it to a Esp32 using the GPIO p…
-
(Moving this from a comment in another issue because the cause was unrelated.)
On three separate occasions, a command to the opener's light resulted in the door opening. Unfortunately, I haven't be…
-
2 of my 4 units are on Craftsman belt-driven overhead units. Flashed with 2.57 MQTT firmware and set for security + 2.0 (yellow buttons). Worked for a bit, but today I discovered that these two Craf…
-
I have several Ratgdo devices installed and I am trying to do an OTA update, but I cannot find the needed bind files.
My Chamberlain is using Security + 1.0, I am using a ratgdo v2.5x board. I am…
-
Hi, I have 4 ratgdo installed, 1 is security 2.0 and 3 are security+. Everything is working on emulation mode, but I just moved one of the security+ wall panels from a doorbell to an 889LM to test it …
-
I originally installed the esphome and ratgod packages using HPM and they worked amazingly well, for which I am very grateful. I installed the most recent version as of 3/4/24 using Hubitat Package M…