-
_ipobserver_ Binding in connection with _Renkforce WH2600_
The channel _lastUpdatedTime_ is not reliably populated by the data source.
## Expected Behavior
The value of "Rec…
-
I had a Cresta DTX500 weather-station. The weather-station outside is for temperature, rain, windforce and wind-direction. After a day or something it picks up only one signal and it was saying low on…
-
### Latest firmware used?
Latest from master.
### Information
Device used: [Conrad Renkforce Wireless socket](https://www.conrad.com/p/renkforce-wireless-socket-indoors-2000-w-1208457)
It's ba…
-
**Application version**
* I am using Ultimaker Cura V 4.7.1
**Platform**
Windows 10 Pro 64 bit
**Printer**
* I selected "Custom FFF printer" but I want to connect to a "Renkforce RF2000 V2"
…
-
I have tested this with the docker image tagged "[master](https://hub.docker.com/layers/tinyfilemanager/tinyfilemanager/master/images/sha256-eacbca962d19bb8f0f50f81924856de33acfa5a69bb84fa1e32031c68b3…
-
Turns out that we only need three files for the custom Marlin firmware. Why keep all of Marlin in this repository when these three files are sufficient?
We can build like this (tested):
```
git…
-
The Heat Index Value mostly shows only 0.
I'm using a Renkforce (Froggit) WH2600.
Outdoor Temperature and Outdoor Humidity both greater than 0.
For example see Picture.
![image](https://github.com…
-
### Version
2.4.0 beta1 win64 (and **presumably earlier versions**)
### Operating system type + version
Windows 8.1
### 3D printer brand / version + firmware version (if known)
Printer:…
-
http://www.reprap.org/wiki/Firmware_Capabilities_Protocol
> M531 filename - Set the filename being printed.
> M532 X L - Update current print state progress (X=0..100) and layer L.
>
> This al…
-
According to http://www.rf1000.de/viewtopic.php?f=89&t=1827&start=20 these may be missing in the source code since Conrad "gets only the compiled file". This would be a clear GPL violation.